VN16BSP13TR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 38mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 82W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VN16 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 20A |
| Operating Supply Voltage | 26V |
| Interface | On/Off |
| Nominal Supply Current | 50mA |
| Output Configuration | High Side |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 50mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 6V |
| Max Input Voltage | 26V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~26V |
| Driver Number of Bits | 1 |
| Fault Protection | Open Load Detect, Over Temperature |
| Turn On Time | 500 μs |
| Rds On (Typ) | 60m Ω (Max) |
| Turn Off Time | 500 μs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
VN16BSP13TR Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).There is a package for it in the PowerSO-10 Exposed Bottom Pad package.Mounting type Surface Mount is selected for the LED driving board.It owns the General Purpose switch type.To ensure reliable operation, set the temperature to -40°C~150°C TJ.As a default, the output is set to 1.A voltage of Not Required is used to power it.The maximum output voltage is N-Channel volts.It is equipped with Status Flag features.The VN16 family consists of this type.It contains 10 terminations.During operation, the 10 pins are used.As far as the lighting driver is concerned, there are 1 functions.To meet the operation criteria, the maximum output current drops to 20A.Using a voltage of 13V allows for high efficiency.There are 10 pins in total on this board.It has 38mOhm resistance.In this case, the output current will be set to 20A.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.The supply voltage should be set at 26V for best efficiency.It has a maximum input voltage of 26V volts.There is a minimum input voltage of 6V volts for this LED driver.This system has a maximum current requirement of 50mA.
VN16BSP13TR Features
Supplied from 13V
Resistance of 38mOhm
VN16BSP13TR Applications
There are a lot of STMicroelectronics VN16BSP13TR Power Switches ICs applications.
- Wireless/Networking Cards
- HDD and SSD
- Solid State Drivers
- Notebook and Tablet Computers
- Hot-Swap Systems
- Portable GPS
- Portable Video Game Players
- PDAs
- PC Cards
- USB Ports/Hubs
