VN16BSPTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 38mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 82W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN16 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 20A |
| Supply Voltage-Max (Vsup) | 26V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Nominal Supply Current | 25μA |
| Output Configuration | High Side |
| Power Dissipation | 82W |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 5.6A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~26V |
| Driver Number of Bits | 1 |
| Fault Protection | Open Load Detect, Over Temperature |
| Turn On Time | 500 μs |
| Rds On (Typ) | 60m Ω (Max) |
| Turn Off Time | 500 μs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN16BSPTR-E Overview
As a result, it is packaged in the form of a Tape & Reel (TR).This package is included in PowerSO-10 Exposed Bottom Pad.It has been mounted as Surface Mount on the LED driver.It owns the General Purpose switch type.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.The lighting driver is equipped with 1 outputs that can be used.A supply voltage of Not Required is required for it to operate.It produces a maximum output voltage of N-Channel volts at its maximum output.As far as features are concerned, the LED driving board has Status Flag.It belongs to the family VN16.As a result, there are 10 terminations.It is necessary to use the 10 pins in order to operate the LED driver.It contains 1 functions.The maximum output current is reduced to 20A to meet the operation criteria.A supply voltage of 13V leads to high efficiency.Surface Mount is mounted in the way of this LED driving board.Currently, the LED driving board has 38mOhm resistance.In this case, the output current will be set to 20A.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.In this case, Vsup (maximum supply voltage) is set to 26V.The supply voltage (Vsup) should be kept above 6V for normal operation.
VN16BSPTR-E Features
Supplied from 13V
Resistance of 38mOhm
VN16BSPTR-E Applications
There are a lot of STMicroelectronics VN16BSPTR-E Power Switches ICs applications.
- Portable Music Players
- Smartphone and PDA
- USB Protection
- PC Card Hot Swap
- Storage (HDDs, SSDs)
- Portable/Handheld Devices
- Hot Swap
- USB Power Distribution
- Storage Drives
- USB Power Distribution
