VN21(012Y)
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | Pentawatt-5 (Straight Leads, Staggered Depth) |
| Surface Mount | NO |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 50mOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 48W |
| Terminal Position | SINGLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VN21 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 23A |
| Supply Voltage-Max (Vsup) | 26V |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 23A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 15mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~26V |
| Driver Number of Bits | 1 |
| Fault Protection | Open Load Detect, Over Temperature |
| Output Peak Current Limit-Nom | 2.5A |
| Rds On (Typ) | 50m Ω (Max) |
| Drain to Source Resistance | 100mOhm |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
VN21(012Y) Overview
It is packaged in the form of a Tube.Package Pentawatt-5 (Straight Leads, Staggered Depth) contains it.In this case, the LED driving board is mounted as Through Hole.It owns General Purpose switch type.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.The lighting driver is equipped with 1 outputs that can be used.It uses a supply voltage of Not Required to operate.There is a maximum output voltage of N-Channel volts.In terms of features, the LED driving board has Status Flag.It belongs to the VN21 family.A total of 5 terminations can be found in it.The operation is performed through the 5 pins.It contains 1 functions.To meet the operation criteria, the maximum output current drops to 23A.High efficiency is possible when the supply voltage is set to 13V.5 pins are equipped with it.It has 50mOhm resistance.The output current is set to 23A in this case.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.The maximum supply voltage for this LED driver is 26V (Vsup).For its operation, a current of 15mA is required.
VN21(012Y) Features
Supplied from 13V
Resistance of 50mOhm
VN21(012Y) Applications
There are a lot of STMicroelectronics VN21(012Y) Power Switches ICs applications.
- Hot Swaps
- Smart Phones, Feature Phones
- Various applications equipped with buttons
- Notebook PC
- Solid-State Drives
- Storage (HDDs, SSDs)
- Handheld Devices
- Portable/Handheld Devices
- Mobile Communication Devices
- Hot-Swap Systems
