VN31
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Pentawatt-5 (Vertical, Bent and Staggered Leads) |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 30mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 54W |
| Terminal Position | ZIG-ZAG |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VN31 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 31A |
| Operating Supply Voltage | 26V |
| Interface | On/Off |
| Nominal Supply Current | 15mA |
| Output Configuration | High Side |
| Power Dissipation | 54W |
| Output Current | 31A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 15mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 26V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~26V |
| Driver Number of Bits | 1 |
| Fault Protection | Open Load Detect, Over Temperature |
| Output Peak Current Limit-Nom | 2.5A |
| Rds On (Typ) | 30m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| RoHS Status | ROHS3 Compliant |
VN31 Overview
As you can see, it's packaged in the way of a Tube.It's included in the Pentawatt-5 (Vertical, Bent and Staggered Leads) package.The LED driver is mounted as Through Hole.General Purpose is the type of switch owned by it.To ensure reliable operation, set the temperature to -40°C~150°C TJ.There are 1 outputs available on this lighting driver.The LED driving board operates with a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.Status Flag features are available on the lighting driver.It is part of the VN31 family of LED drivers.It contains 5 terminations.For operation, we use the 5 pins.It has 1 functions.Maximum output current falls to 31A when operation criteria are met.It is possible to obtain high efficiency with a supply voltage of 13V.The lighting driver is mounted in the way of Through Hole.It is equipped with a total of 5 pins.Currently, the LED driving board has a resistance of 30mOhm ohms.In this case, the output current will be set to 31A.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.It is recommended that the supply voltage be set at 26V in order to achieve maximum efficiency.A maximum input voltage of 26V volts can be applied to it.As far as input voltage goes, it has a minimum of 5.5V volts.It has a maximum current requirement of 15mA.
VN31 Features
Supplied from 13V
Resistance of 30mOhm
VN31 Applications
There are a lot of STMicroelectronics VN31 Power Switches ICs applications.
- Solid State Drivers
- Notebook and Tablet Computers
- Low Voltage I/O System Power
- Portable Devices
- Wireless Headsets
- USB Power Distribution
- Portable/Handheld Devices
- Portable Video Game Players
- Portable GPS
- Hard Disk Drives
