VN31-E
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Pentawatt-5 (Vertical, Bent and Staggered Leads) |
| Number of Pins | 5 |
| Supplier Device Package | 5-PENTAWATT |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Resistance | 30mOhm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 54W |
| Base Part Number | VN31 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 31A |
| Operating Supply Voltage | 26V |
| Interface | On/Off |
| Current - Output (Max) | 31A |
| Nominal Supply Current | 15mA |
| Output Configuration | High Side |
| Power Dissipation | 54W |
| Output Current | 31A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 15mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 26V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~26V |
| Fault Protection | Open Load Detect, Over Temperature |
| Rds On (Typ) | 30mOhm (Max) |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN31-E Overview
Tube is how it's packaged.This file is included in package Pentawatt-5 (Vertical, Bent and Staggered Leads).It has been mounted as Through Hole on the LED driver.It owns the General Purpose switch type.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.As a default, the output is set to 1.The LED driving board is powered by a voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.In terms of features, the LED driving board has Status Flag.As you can see, it comes from the VN31 family.The operation is carried out using the 5 pins.31AV is the maximum output of the LED driver.It is necessary to reduce the maximum output current to 31A to meet the operation criteria.Through Hole is mounted in the way of this LED driving board.In this LED driving board, there is 30mOhm resistance.This case results in a 31A output current.In order to achieve the best efficiency, the supply voltage should be set to 26V.Voltage input is limited to 26V volts.The minimum input voltage is 5.5V volts.For stable operation, the maximum operating temperature is 150°C°C.To ensure reliability, the system operates at a minimum temperature of -40°C degrees Celsius.It operates at a maximum current of 15mA.
VN31-E Features
Resistance of 30mOhm
VN31-E Applications
There are a lot of STMicroelectronics VN31-E Power Switches ICs applications.
- HDD, SSD
- Handheld Devices
- Storage (HDDs, SSDs)
- Smart Phones, Feature Phones
- Portable GPS
- Hard Disk Drives
- Smartphone and PDA
- PC Card Hot Swap
- Mobile Communication Devices
- Telecom and Network Systems
