VN31(011Y)
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Pentawatt-5 (Horizontal, Bent and Staggered Leads) |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 30mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 54W |
| Terminal Position | ZIG-ZAG |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VN31 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 31A |
| Operating Supply Voltage | 26V |
| Interface | On/Off |
| Nominal Supply Current | 15mA |
| Output Configuration | High Side |
| Power Dissipation | 54W |
| Output Current | 31A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 50mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 26V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~26V |
| Driver Number of Bits | 1 |
| Fault Protection | Open Load Detect, Over Temperature |
| Output Peak Current Limit-Nom | 2.5A |
| Rds On (Typ) | 30m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
VN31(011Y) Overview
It is package in Tube case.Package Pentawatt-5 (Horizontal, Bent and Staggered Leads) contains it.The lighting driver has the mounting type Through Hole.This switch is of type General Purpose.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.The LED driver has a total of 1 outputs.To operate, it needs a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.As far as features are concerned, the LED driving board has Status Flag.The VN31 family consists of this type.A total of 5 terminations have been found in it.The operation is carried out using the 5 pins.As far as functions are concerned, the lighting driver has 1.The maximum output current drops to 31A in order to meet the operation criteria.High efficiency is possible when the supply voltage is set to 13V.Through Hole is mounted in the way.In total, it has 5 pins.Lighting drivers with 30mOhm resistance are used.This results in a 31A output current.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.In order to maximize efficiency, the supply voltage should be set to 26V.Voltage input is limited to 26V volts.Input voltage must be at least 5.5V volts.A maximum current requirement of 50mA is required for its operation.
VN31(011Y) Features
Supplied from 13V
Resistance of 30mOhm
VN31(011Y) Applications
There are a lot of STMicroelectronics VN31(011Y) Power Switches ICs applications.
- Telecom and Network Systems
- Solid-State Drives
- Smart Phones, Feature Phones
- Portable GPS Device
- PC Card Hot Swap
- Notebook PC
- USB Power Distribution
- Portable GPS
- HDD, SSD
- Set-Top Boxes
