banner_page

VN31SP

N-Channel PMIC VN31 10 Pin 13V PowerSO-10 Exposed Bottom Pad


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-VN31SP
  • Package: PowerSO-10 Exposed Bottom Pad
  • Datasheet: PDF
  • Stock: 507
  • Description: N-Channel PMIC VN31 10 Pin 13V PowerSO-10 Exposed Bottom Pad (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case PowerSO-10 Exposed Bottom Pad
Number of Pins 10
Operating Temperature -40°C~150°C TJ
Packaging Tube
JESD-609 Code e3
Feature Status Flag
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 10
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
Subcategory Peripheral Drivers
Max Power Dissipation 54W
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 13V
Base Part Number VN31
Pin Count 10
Number of Outputs 1
Output Type N-Channel
Max Output Current 31A
Supply Voltage-Max (Vsup) 26V
Supply Voltage-Min (Vsup) 5.5V
Interface On/Off
Nominal Supply Current 50μA
Output Configuration High Side
Power Dissipation 54W
Output Current 31A
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Ratio - Input:Output 1:1
Voltage - Load 5.5V~26V
Driver Number of Bits 1
Fault Protection Open Load Detect, Over Temperature
Output Peak Current Limit-Nom 2.5A
Rds On (Typ) 30m Ω (Max)
Built-in Protections TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE
Height Seated (Max) 3.75mm
Length 9.4mm
Width 7.5mm
Radiation Hardening No
RoHS Status ROHS3 Compliant

VN31SP Overview


It's?packaged?in?the way?of?a?Tube.It is included in the package PowerSO-10 Exposed Bottom Pad.In this case, the LED driving board is mounted as Surface Mount.There is a General Purpose switch type associated with it.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driver has 1 outputs.Operation is based on a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.It is equipped with Status Flag features.It belongs to the family VN31.There are 10 terminations in it.The operation is performed through the 10 pins.As far as the lighting driver is concerned, there are 1 functions.This operation requires the maximum output current to be decreased to 31A.It is possible to achieve a high level of efficiency with a supply voltage of 13V.Surface Mount is mounted in the way of this lighting driver.10 pins are equipped with it.When this case is used, the output current is set to 31A.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.The LED driver is configured with a maximum supply voltage of 26V (Vsup).Normal operation requires a voltage above 5.5V for the supply voltage.

VN31SP Features


Supplied from 13V

VN31SP Applications


There are a lot of STMicroelectronics VN31SP Power Switches ICs applications.

  • USB Power Distribution
  • Portable Music Players
  • HDD and SSD
  • USB3.1 Power Delivery
  • PC Card Hot Swap
  • Portable Devices
  • USB Ports/Hubs
  • Telecom and Network Systems
  • PDAs
  • Portable GPS

Write a review

Note: HTML is not translated!
    Bad           Good