VN31SP-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Resistance | 60mOhm |
| Max Power Dissipation | 54W |
| Base Part Number | VN31 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 31A |
| Operating Supply Voltage | 26V |
| Interface | On/Off |
| Nominal Supply Current | 50μA |
| Output Configuration | High Side |
| Power Dissipation | 54W |
| Output Current | 31A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 50μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 26V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~26V |
| Fault Protection | Open Load Detect, Over Temperature |
| Rds On (Typ) | 30m Ω (Max) |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VN31SP-E Overview
Tube is the way it's packaged.It is included with the PowerSO-10 Exposed Bottom Pad package as well.Surface Mount is the mounting type of the LED driver.A General Purpose switch type is owned by it.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.The LED driver is equipped with 1 outputs.To operate, it needs a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts.Currently, the LED driving board is equipped with Status Flag features.The VN31 family contains this object.In order to operate, the 12 pins are used.This operation requires the maximum output current to be decreased to 31A.It is positioned in the direction of Surface Mount.Lighting drivers with 60mOhm resistance are used.The output current is set to 31A in this case.It is recommended to set the supply voltage to 26V for optimum efficiency.As far as input voltage goes, its maximum is 26V volts.There is a minimum input voltage of 5.5V volts for this LED driver.For its operation, a current of 50μA is required.
VN31SP-E Features
Resistance of 60mOhm
VN31SP-E Applications
There are a lot of STMicroelectronics VN31SP-E Power Switches ICs applications.
- Hot Swaps
- USB Power Distribution
- USB Power Distribution
- Hot Swap
- Wireless/Networking Cards
- Smart Phones, Feature Phones
- Notebook PC
- HDD and SSD
- Portable Devices
- Portable/Handheld Devices
