banner_page

VN31SP13TR

N-Channel PMIC VN31 10 Pin 13V PowerSO-10 Exposed Bottom Pad


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-VN31SP13TR
  • Package: PowerSO-10 Exposed Bottom Pad
  • Datasheet: PDF
  • Stock: 606
  • Description: N-Channel PMIC VN31 10 Pin 13V PowerSO-10 Exposed Bottom Pad (Kg)

Details

Tags

Parameters
Supply Voltage-Max (Vsup) 26V
Supply Voltage-Min (Vsup) 5.5V
Interface On/Off
Nominal Supply Current 50μA
Output Configuration High Side
Power Dissipation 54W
Output Current 31A
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Output Current per Channel 11.5A
Ratio - Input:Output 1:1
Voltage - Load 5.5V~26V
Driver Number of Bits 1
Fault Protection Open Load Detect, Over Temperature
Output Peak Current Limit-Nom 2.5A
Rds On (Typ) 30m Ω (Max)
Built-in Protections TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE
Height Seated (Max) 3.75mm
Length 9.4mm
Width 7.5mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Mount Surface Mount
Mounting Type Surface Mount
Package / Case PowerSO-10 Exposed Bottom Pad
Number of Pins 10
Operating Temperature -40°C~150°C TJ
Packaging Tape & Reel (TR)
JESD-609 Code e3
Feature Status Flag
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 10
ECCN Code EAR99
Resistance 30mOhm
Terminal Finish Matte Tin (Sn) - annealed
Subcategory Peripheral Drivers
Max Power Dissipation 54W
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 13V
Base Part Number VN31
Pin Count 10
Number of Outputs 1
Output Type N-Channel
Max Output Current 31A

VN31SP13TR Overview


It's?packaged?in?the way?of?a?Tape & Reel (TR).Package PowerSO-10 Exposed Bottom Pad contains it.The lighting driver has the mounting type Surface Mount.There is a switch type of General Purpose.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.The LED driver has 1 outputs.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts.The lighting driver has Status Flag features.As you can see, it comes from the VN31 family.It contains 10 terminations.The operation is performed through the 10 pins.The LED driving board has a total of 1 functions.In order to meet the operation criteria, the maximum output current drops to 31A.The supply voltage of 13V is conducive to high efficiency.The lighting driver is mounted in the way of Surface Mount.This LED driver is equipped with a total of 10 pins.In this LED driving board, there is 30mOhm resistance.The output current is set to 31A in this case.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.Vsup (maximum supply voltage) is set to 26V.A normal operation requires that the supply voltage (Vsup) remain above 5.5V.

VN31SP13TR Features


Supplied from 13V
Resistance of 30mOhm

VN31SP13TR Applications


There are a lot of STMicroelectronics VN31SP13TR Power Switches ICs applications.

  • Smartphone and PDA
  • Portable Devices
  • Portable GPS
  • Wireless Modem Data Cards
  • USB Ports/Hubs
  • HDD, SSD
  • USB Power Distribution
  • Wireless Headsets
  • Wireless/Networking Cards
  • Set-top-box

Write a review

Note: HTML is not translated!
    Bad           Good