VN31SPTR-E
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Current Rating | 31A |
| Base Part Number | VN31 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 31A |
| Supply Voltage-Max (Vsup) | 26V |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 15mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 11.5A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~26V |
| Driver Number of Bits | 1 |
| Fault Protection | Open Load Detect, Over Temperature |
| Output Peak Current Limit-Nom | 2.5A |
| Rds On (Typ) | 30m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 30mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 54W |
VN31SPTR-E Overview
Tape & Reel (TR) is how it's packaged.In the PowerSO-10 Exposed Bottom Pad package, it is included.Mounting type Surface Mount is selected for the LED driving board.General Purpose is the type of switch owned by it.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.There are 1 outputs available on this lighting driver.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.There are Status Flag features available on the LED driving board.The VN31 family contains this object.It has a total of 10 terminations.For operation, 10 pins are used.Currently, there are 1 functions associated with the lighting driver.The maximum output current is reduced to 31A to meet the operation criteria.The supply voltage of 13V is conducive to high efficiency.As a result, it is mounted in the manner of Surface Mount.It has 30mOhm resistance.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.In this case, Vsup (maximum supply voltage) is set to 26V.For normal operation, the supply voltage (Vsup) must be kept above 5.5V.
VN31SPTR-E Features
Supplied from 13V
Resistance of 30mOhm
VN31SPTR-E Applications
There are a lot of STMicroelectronics VN31SPTR-E Power Switches ICs applications.
- Portable GPS Device
- HDD, SSD
- USB Power Distribution
- Various applications equipped with buttons
- Smartphone and PDA
- Mobile Communication Devices
- Hot Swaps
- Handheld Devices
- Gaming
- Notebook PC
