VN330SP-32-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 12 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 200mOhm |
| Terminal Finish | MATTE TIN |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 4 |
| Supply Voltage | 24V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VN330 |
| Pin Count | 10 |
| JESD-30 Code | R-PDSO-G10 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 4A |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 10V |
| Max Input Voltage | 36V |
| Output Current per Channel | 1A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 10V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 200m Ω (Max) |
| Turn Off Time | 30 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; UNDER VOLTAGE |
| Height Seated (Max) | 3.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN330SP-32-E Overview
Tube is the way it's packaged.This package is included in PowerSO-10 Exposed Bottom Pad.The LED driver is mounted as Surface Mount.The switch type is General Purpose.To ensure reliable operation, set the temperature to -40°C~125°C TJ.As a default, the output is set to 4.To operate, it needs a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.The lighting driver has Status Flag features.It belongs to the family VN330.There are 10 terminations in it.It is necessary to use the 12 pins in order to operate the LED driver.It contains 4 functions.In order to meet the operation criteria, the maximum output current drops to 4A.It is possible to achieve a high level of efficiency with a supply voltage of 24V.The lighting driver is mounted in the way of Surface Mount.The LED driver has a total of 10 pins.In this LED driving board, there is 200mOhm resistance.In this case, the output current will be set to 1A.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.In order to maximize efficiency, the supply voltage should be set at 36V.A maximum input voltage of 36V volts can be applied to it.The minimum input voltage is 10V volts.It operates at a maximum current of 6mA.
VN330SP-32-E Features
Supplied from 24V
Resistance of 200mOhm
VN330SP-32-E Applications
There are a lot of STMicroelectronics VN330SP-32-E Power Switches ICs applications.
- Solid State Drivers
- Portable Video Game Players
- Storage (HDDs, SSDs)
- HDD and SSD
- USB Power Distribution
- USB Power Distribution
- Smartphone and PDA
- Telecom and Network Systems
- Gaming
- Hot Swap
