VN330SP
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 24V |
| Terminal Pitch | 1.27mm |
| Base Part Number | VN330 |
| Pin Count | 10 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 700mA |
| Supply Voltage-Max (Vsup) | 36V |
| Interface | On/Off |
| Nominal Supply Current | 10mA |
| Output Configuration | High Side |
| Output Current | 700mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 10V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 320m Ω (Max) |
| Drain to Source Resistance | 400mOhm |
| Turn Off Time | 30 μs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.75mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VN330SP Overview
It is package in Tube case.This package is included in PowerSO-10 Exposed Bottom Pad.This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the type of switch owned by it.It is recommended to set the temperature to -40°C~125°C TJ in order to ensure reliable operation.The LED driver has 4 outputs.The LED driving board operates at Not Required volts.It has a maximum output voltage of N-Channel volts.In terms of features, the LED driving board has Status Flag.It belongs to the family VN330.A total of 10 terminations have been found in it.In order to operate, 10 pins are used.Currently, there are 4 functions associated with the lighting driver.It is necessary to reduce the maximum output current to 700mA to meet the operation criteria.The supply voltage of 24V is conducive to high efficiency.Surface Mount is mounted in the way of this LED driving board.10 pins are equipped with it.This case has the output current set to 700mA.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.The maximum supply voltage for this lighting driver is set to 36V (Vsup).
VN330SP Features
Supplied from 24V
VN330SP Applications
There are a lot of STMicroelectronics VN330SP Power Switches ICs applications.
- Wireless/Networking Cards
- USB Protection
- Set-top-box
- Notebook PC
- Solid-State Drives
- PC Cards
- Hot-Swap Systems
- PC Card Hot Swap
- Low Voltage I/O System Power
- Storage Drives
