banner_page

VN330SP-E

N-Channel 1.27mm PMIC VN330 10 Pin 24V PowerSO-10 Exposed Bottom Pad


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-VN330SP-E
  • Package: PowerSO-10 Exposed Bottom Pad
  • Datasheet: PDF
  • Stock: 718
  • Description: N-Channel 1.27mm PMIC VN330 10 Pin 24V PowerSO-10 Exposed Bottom Pad (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 7 months ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case PowerSO-10 Exposed Bottom Pad
Number of Pins 10
Weight 4.535924g
Operating Temperature -40°C~125°C TJ
Packaging Tube
JESD-609 Code e3
Feature Status Flag
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 10
ECCN Code EAR99
Resistance 200mOhm
Terminal Finish Tin (Sn)
Subcategory Peripheral Drivers
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 4
Supply Voltage 24V
Terminal Pitch 1.27mm
Current Rating 4A
Base Part Number VN330
Pin Count 10
Number of Outputs 4
Output Voltage 45V
Output Type N-Channel
Max Output Current 4A
Voltage 45V
Interface On/Off
Nominal Supply Current 6mA
Current 700mA
Output Configuration High Side
Output Current 700mA
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Output Current per Channel 700mA
Ratio - Input:Output 1:1
Voltage - Load 10V~36V
Driver Number of Bits 4
Fault Protection Current Limiting (Fixed), Over Temperature
Turn On Time 60 µs
Rds On (Typ) 200m Ω (Max)
Built-in Protections OVER CURRENT; THERMAL; UNDER VOLTAGE
Height 3.65mm
Length 9.5mm
Width 7.6mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

VN330SP-E Overview


The package is in the form of a Tube.It is included in the package PowerSO-10 Exposed Bottom Pad.A Surface Mount mounting is used for the LED driving board.A General Purpose switch type is owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.By default, it is set to output 4.It uses a supply voltage of Not Required to operate.There is a maximum output voltage of N-Channel volts.Status Flag features are available on the lighting driver.There is a VN330 family of things that it belongs to.It has a total of 10 terminations.In order to operate, 10 pins are used.It consists of 4 functions.Maximum output current falls to 4A when operation criteria are met.A supply voltage of 24V leads to high efficiency.It is positioned in the direction of Surface Mount.The LED driving board is equipped with a total of 10 pins.200mOhm is the resistance of the lighting driver.As a result, the output current is set to 700mA.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.

VN330SP-E Features


Supplied from 24V
Resistance of 200mOhm

VN330SP-E Applications


There are a lot of STMicroelectronics VN330SP-E Power Switches ICs applications.

  • Portable Devices
  • Portable/Handheld Devices
  • USB3.1 Power Delivery
  • PC Card Hot Swap
  • Wireless/Networking Cards
  • HDD and SSD
  • Various applications equipped with buttons
  • Solid State Drivers
  • USB Ports/Hubs
  • PC Cards

Write a review

Note: HTML is not translated!
    Bad           Good