VN330SPTR-32-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 200mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 4 |
| Supply Voltage | 24V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VN330 |
| Pin Count | 10 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 4A |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 60 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 10V |
| Max Input Voltage | 36V |
| Output Current per Channel | 1A |
| Turn-Off Delay Time | 40 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 10V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 200m Ω (Max) |
| Turn Off Time | 30 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; UNDER VOLTAGE |
| Height Seated (Max) | 3.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN330SPTR-32-E Overview
A Tape & Reel (TR) is used to package it.The PowerSO-10 Exposed Bottom Pad package includes it.This lighting drivere has a mounting type of Surface Mount.This switch is of type General Purpose.The temperature should be set to -40°C~125°C TJ to ensure reliable functioning.There is a default setting of 4 for output.To operate, it needs a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.This LED driving board is equipped with Status Flag features in order for it to be useful.It is a member of the VN330 family.A total of 10 terminations can be found in it.For operation, 10 pins are used.It is important to note that the LED driving board has 4 functions.To meet the operation criteria, the maximum output current drops to 4A.The supply voltage can be 24V for high efficiency.Surface Mount is mounted in the way.This LED driver is equipped with a total of 10 pins.It has 200mOhm resistance.This case results in a 1A output current.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.In order to maximize efficiency, the supply voltage should be set to 36V.The maximum input voltage of the LED driver is 36V volts.As a minimum input voltage, it requires 10V volts.6mA is the maximum current required to operate it.
VN330SPTR-32-E Features
Supplied from 24V
Resistance of 200mOhm
VN330SPTR-32-E Applications
There are a lot of STMicroelectronics VN330SPTR-32-E Power Switches ICs applications.
- Hot Swap
- Portable Video Game Players
- Hard Disk Drives
- Hot-Swap Systems
- PC Cards
- Gaming
- USB Power Distribution
- Portable GPS
- Handheld Devices
- Solid State Drivers
