VN330SPTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 200mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 4 |
| Supply Voltage | 24V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VN330 |
| Pin Count | 10 |
| Output Type | N-Channel |
| Max Output Current | 4A |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Output Current | 700mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 700mA |
| Rise Time | 50μs |
| Fall Time (Typ) | 20 μs |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 10V~36V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Number of Drivers | 4 |
| Turn On Time | 60 µs |
| Rds On (Typ) | 200m Ω (Max) |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 3.65mm |
| Length | 7.6mm |
| Width | 9.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN330SPTR-E Overview
Tape & Reel (TR) is the way it's packaged.In the PowerSO-10 Exposed Bottom Pad package, it is included.In this case, the LED driving board is mounted as Surface Mount.It owns General Purpose switch type.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.The LED driving board is powered by a voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.A lighting driver with Status Flag features is available.It belongs to the VN330 family.It has a total of 10 terminations.For operation, 10 pins are used.It has 4 functions.Maximum output current falls to 4A when operation criteria are met.A supply voltage of 24V leads to high efficiency.The LED driving board is mounted in the way of Surface Mount.10 pins are connected to it in total.There is 200mOhm resistance on the LED driver.This case results in a 700mA output current.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.For maximum efficiency, the supply voltage should be set to 36V.It is equipped with 4 drivers.
VN330SPTR-E Features
Supplied from 24V
Resistance of 200mOhm
VN330SPTR-E Applications
There are a lot of STMicroelectronics VN330SPTR-E Power Switches ICs applications.
- Wireless/Networking Cards
- Smart Phones, Feature Phones
- Hot Swaps
- Portable GPS Device
- USB Ports/Hubs
- Wireless Modem Data Cards
- Hot-Swap Systems
- Portable Music Players
- Portable Devices
- Storage (HDDs, SSDs)
