VN340SP-33-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 200mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 4 |
| Supply Voltage | 24V |
| Terminal Pitch | 1.27mm |
| Base Part Number | VN340 |
| Pin Count | 10 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 4A |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 1mA |
| Output Configuration | High Side |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 1mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 10V |
| Max Input Voltage | 36V |
| Output Current per Channel | 1A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 10V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 200m Ω (Max) |
| Turn Off Time | 50 μs |
| Built-in Protections | TRANSIENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.66mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VN340SP-33-E Overview
As you can see, it's packaged in the way of a Tube.It's included in the PowerSO-10 Exposed Bottom Pad package.Mounting type Surface Mount is selected for the LED driving board.General Purpose is the switch type it owns.It is recommended to set the temperature to -40°C~125°C TJ in order to ensure reliable operation.The LED driver is equipped with 4 outputs.Operation is based on a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.Status Flag features are available on the lighting driver.It belongs to the family VN340.A total of 10 terminations have been found in it.The operation is carried out using the 10 pins.The LED driver has 4 functions.It is necessary to reduce the maximum output current to 4A to meet the operation criteria.With a supply voltage of 24V, high efficiency is possible.The LED driving board is mounted in the way of Surface Mount.A total of 10 pins are included in this LED driver.Currently, the LED driving board has a resistance of 200mOhm ohms.It is set to 1A in this case.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.It is recommended that the supply voltage be set at 36V in order to achieve maximum efficiency.The maximum input voltage of the LED driver is 36V volts.A voltage of 10V volts is the minimum input voltage.It has a maximum current requirement of 1mA.
VN340SP-33-E Features
Supplied from 24V
Resistance of 200mOhm
VN340SP-33-E Applications
There are a lot of STMicroelectronics VN340SP-33-E Power Switches ICs applications.
- Notebook PC
- Set-Top Boxes
- Smart Phones, Feature Phones
- Storage (HDDs, SSDs)
- Hot Swap
- USB3.1 Power Delivery
- Hot Swaps
- Portable Devices
- Portable/Handheld Devices
- USB Power Distribution
