VN340SP
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 24V |
| Terminal Pitch | 1.27mm |
| Base Part Number | VN340 |
| Pin Count | 10 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 700mA |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 10V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 200m Ω (Max) |
| Drain to Source Resistance | 400mOhm |
| Turn Off Time | 50 µs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 3.75mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN340SP Overview
The package is in the form of a Tube.It is included with the PowerSO-10 Exposed Bottom Pad package as well.The mounting type of the LED driver is Surface Mount.This switch is of type General Purpose.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.The LED driver has a total of 4 outputs.A voltage of Not Required is used to power it.A maximum output voltage of N-Channel volts can be obtained with this LED driver.There are Status Flag features available on the LED driving board.The VN340 family consists of this type.As a result, there are 10 terminations.For operation, 10 pins are used.The LED driving board has a total of 4 functions.To meet the operation criteria, the maximum output current drops to 700mA.The supply voltage can be 24V for high efficiency.The LED driving board is mounted in the way of Surface Mount.There are 10 pins in total on this board.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.It is recommended to set the supply voltage to 36V for optimum efficiency.
VN340SP Features
Supplied from 24V
VN340SP Applications
There are a lot of STMicroelectronics VN340SP Power Switches ICs applications.
- Mobile Communication Devices
- Portable GPS Device
- Wireless/Networking Cards
- Set-top-box
- Various applications equipped with buttons
- Notebook PC
- Wearable Devices
- Set-Top Boxes
- Solid-State Drives
- Solid State Drivers
