VN340SPTR-33-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 12 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 200mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 4 |
| Supply Voltage | 24V |
| Terminal Pitch | 1.27mm |
| Base Part Number | VN340 |
| Pin Count | 10 |
| JESD-30 Code | R-PDSO-G10 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 4A |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 1mA |
| Output Configuration | High Side |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 1mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 10V |
| Max Input Voltage | 36V |
| Output Current per Channel | 1A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 10V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Turn On Time | 100 µs |
| Rds On (Typ) | 200m Ω (Max) |
| Turn Off Time | 50 µs |
| Built-in Protections | TRANSIENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.66mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN340SPTR-33-E Overview
A Tape & Reel (TR) is used to package it.The PowerSO-10 Exposed Bottom Pad package contains it.The LED driver is mounted as Surface Mount.A General Purpose switch type is owned by it.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.The LED driver has 4 outputs.A voltage of Not Required is used to power it.A maximum output voltage of N-Channel volts can be obtained with this LED driver.Features of the lighting driver are Status Flag.It belongs to the family VN340.It consists of 10 terminations in total.During operation, the 12 pins are used.There are 4 functions of the LED driver.It is necessary to reduce the maximum output current to 4A to meet the operation criteria.The supply voltage can be 24V for high efficiency.Surface Mount is mounted in the way of this LED driving board.It is equipped with a total of 10 pins.The LED driver has 200mOhm resistance.This case results in a 1A output current.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.For maximum efficiency, the supply voltage should be set to 36V.This LED driver can handle voltages up to 36V volts.There is a minimum input voltage of 10V volts.A maximum current requirement of 1mA is required for its operation.
VN340SPTR-33-E Features
Supplied from 24V
Resistance of 200mOhm
VN340SPTR-33-E Applications
There are a lot of STMicroelectronics VN340SPTR-33-E Power Switches ICs applications.
- Smart Phones, Feature Phones
- Storage Drives
- USB Protection
- Hot Swap
- Handheld Devices
- Hot Swaps
- Low Voltage I/O System Power
- Hot-Swap Systems
- Portable Music Players
- Portable/Handheld Devices
