VN340SPTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 200mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 24V |
| Terminal Pitch | 1.27mm |
| Base Part Number | VN340 |
| Pin Count | 10 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 4A |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Output Current | 700mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 52 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 10V |
| Max Input Voltage | 36V |
| Output Current per Channel | 700mA |
| Turn-Off Delay Time | 34 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 10V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 200m Ω (Max) |
| Turn Off Time | 50 µs |
| Built-in Protections | TRANSIENT; THERMAL; UNDER VOLTAGE |
| Height | 3.65mm |
| Length | 7.6mm |
| Width | 9.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN340SPTR-E Overview
Tape & Reel (TR) is the way it's packaged.In the PowerSO-10 Exposed Bottom Pad package, it is included.A Surface Mount mounting is used for the LED driving board.A General Purpose switch type is owned by it.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.As a default, the output is set to 4.With a supply voltage of Not Required, the LED driving board operates.The maximum output voltage of this LED driver is N-Channel volts.In terms of features, the LED driving board has Status Flag.It belongs to the VN340 family.A total of 10 terminations have been found in it.The 10 pins are used to operate the LED driver.Currently, there are 4 functions associated with the lighting driver.Maximum output current falls to 4A when operation criteria are met.Using a voltage of 24V allows for high efficiency.The lighting driver is mounted in the way of Surface Mount.As a result, it has a total of 10 pins.It has 200mOhm resistance.The output current is set to 700mA in this case.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.The supply voltage should be set at 36V for best efficiency.As far as input voltage goes, its maximum is 36V volts.As a minimum input voltage, it requires 10V volts.For its operation, a current of 6mA is required.
VN340SPTR-E Features
Supplied from 24V
Resistance of 200mOhm
VN340SPTR-E Applications
There are a lot of STMicroelectronics VN340SPTR-E Power Switches ICs applications.
- Low Voltage I/O System Power
- Storage (HDDs, SSDs)
- Portable Video Game Players
- Storage Drives
- USB Ports/Hubs
- HDD, SSD
- Solid State Drivers
- Notebook and Tablet Computers
- PC Card Hot Swap
- Portable Devices
