VN460SP
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 20mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 112W |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN460 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 25A |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 15μA |
| Output Configuration | High Side |
| Power Dissipation | 112W |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 30mA |
| Input Type | Non-Inverting |
| Switch Type | Relay, Solenoid Driver |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 250 µs |
| Output Peak Current Limit-Nom | 5.4A |
| Rds On (Typ) | 20m Ω (Max) |
| Built-in Protections | OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
VN460SP Overview
It is package in Tube case.Package PowerSO-10 Exposed Bottom Pad contains it.The lighting driver is mounted in the Surface Mount position.The switch type is Relay, Solenoid Driver.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The LED driver has 1 outputs.In order to operate, it requires a voltage supply of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.Currently, the LED driving board is equipped with Status Flag features.It belongs to the family VN460.A total of 10 terminations have been found in it.The operation is performed through the 10 pins.It has 1 functions.The maximum output current drops to 25A in order to meet the operation criteria.A supply voltage of 13V leads to high efficiency.This lighting driver is mounted in the way of Surface Mount.As a result, it has a total of 10 pins.It has a resistance of 20mOhm.The output current is set to 25A in this case.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.It is recommended that the supply voltage be set at 36V in order to achieve maximum efficiency.This LED driving board can accept voltages up to 36V volts as an input.It requires 5.5V volts as the minimum input voltage.For its operation, a current of 30mA is required.
VN460SP Features
Supplied from 13V
Resistance of 20mOhm
VN460SP Applications
There are a lot of STMicroelectronics VN460SP Power Switches ICs applications.
- Wireless/Networking Cards
- Mobile Communication Devices
- Wearable Devices
- Portable/Handheld Devices
- Solid State Drivers
- Storage (HDDs, SSDs)
- Portable GPS
- USB Power Distribution
- Gaming
- PC Cards
