VN460SP-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 20mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 112W |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Base Part Number | VN460 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 25A |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 15μA |
| Output Configuration | High Side |
| Power Dissipation | 112W |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 15μA |
| Input Type | Non-Inverting |
| Switch Type | Relay, Solenoid Driver |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 20m Ω (Max) |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN460SP-E Overview
It is package in Tube case.This file is included in package PowerSO-10 Exposed Bottom Pad.In this case, the LED driving board is mounted as Surface Mount.A Relay, Solenoid Driver switch type is owned by it.To ensure reliable operation, set the temperature to -40°C~150°C TJ.The LED driver has 1 outputs.The LED driving board operates with a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.It is equipped with Status Flag features.This object belongs to the VN460 family.A total of 10 terminations have been recorded.During operation, the 10 pins are used.In order to meet the operation criteria, the maximum output current drops to 25A.The LED driving board is mounted in the way of Surface Mount.20mOhm resistance is present in the lighting driver.When this case is used, the output current is set to 25A.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.In order to achieve the best efficiency, the supply voltage should be set to 36V.There is a maximum input voltage of 36V volts.It has a 5.5V volt minimum input voltage.15μA is the maximum current required to operate it.
VN460SP-E Features
Resistance of 20mOhm
VN460SP-E Applications
There are a lot of STMicroelectronics VN460SP-E Power Switches ICs applications.
- Wireless/Networking Cards
- Wireless Headsets
- Telecom and Network Systems
- Portable GPS Device
- Storage (HDDs, SSDs)
- USB Power Distribution
- Notebook and Tablet Computers
- USB Ports/Hubs
- Set-top-box
- Portable GPS
