VN460SP13TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 20mOhm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 112W |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN460 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 25A |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 15μA |
| Output Configuration | High Side |
| Power Dissipation | 112W |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 30mA |
| Input Type | Non-Inverting |
| Switch Type | Relay, Solenoid Driver |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 250 µs |
| Output Peak Current Limit-Nom | 5.4A |
| Rds On (Typ) | 20m Ω (Max) |
| Built-in Protections | OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VN460SP13TR Overview
It is package in Tape & Reel (TR) case.In the PowerSO-10 Exposed Bottom Pad package, it is included.A Surface Mount mounting is used for the LED driving board.It owns the Relay, Solenoid Driver switch type.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.As a default, the output is set to 1.A supply voltage of Not Required is required for it to operate.It has a maximum output voltage of N-Channel volts.It has a total of Status Flag features.As you can see, it comes from the VN460 family.It has a total of 10 terminations.It is necessary to use the 10 pins in order to operate the LED driver.There are 1 functions of the LED driver.It is necessary to reduce the maximum output current to 25A to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 13V.The lighting driver is mounted in the way of Surface Mount.As a result, it has a total of 10 pins.Lighting drivers with 20mOhm resistance are used.It is set to 25A in this case.It is self-contained in an econtainer with a capacity of Peripheral Drivers.In order to achieve the best efficiency, the supply voltage should be set to 36V.There is a maximum input voltage of 36V volts.Input voltage must be at least 5.5V volts.This system has a maximum current requirement of 30mA.
VN460SP13TR Features
Supplied from 13V
Resistance of 20mOhm
VN460SP13TR Applications
There are a lot of STMicroelectronics VN460SP13TR Power Switches ICs applications.
- Portable Devices
- PDAs
- Portable Music Players
- PC Card Hot Swap
- Smartphone and PDA
- HDD, SSD
- Portable/Handheld Devices
- Various applications equipped with buttons
- Wireless Modem Data Cards
- USB Power Distribution
