VN460SPTR-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 20mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 112W |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Base Part Number | VN460 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 25A |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 15μA |
| Output Configuration | High Side |
| Power Dissipation | 112W |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 15μA |
| Input Type | Non-Inverting |
| Switch Type | Relay, Solenoid Driver |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 20m Ω (Max) |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN460SPTR-E Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).In the PowerSO-10 Exposed Bottom Pad package, it is included.In this case, the LED driving board is mounted as Surface Mount.It owns Relay, Solenoid Driver switch type.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.The LED driver has 1 outputs.Operation is based on a supply voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.Currently, the LED driving board is equipped with Status Flag features.It is a member of the VN460 family.The termination count is 10.During operation, the 10 pins are used.It is necessary to reduce the maximum output current to 25A to meet the operation criteria.The LED driving board is mounted in the way of Surface Mount.It has 20mOhm resistance.In this case, the output current will be set to 25A.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.In order to optimize the efficiency of the supply voltage, it should be set to 36V.A maximum input voltage of 36V volts can be applied to it.There is a minimum input voltage of 5.5V volts.This system has a maximum current requirement of 15μA.
VN460SPTR-E Features
Resistance of 20mOhm
VN460SPTR-E Applications
There are a lot of STMicroelectronics VN460SPTR-E Power Switches ICs applications.
- Set-Top Boxes
- USB Ports/Hubs
- USB Power Distribution
- Telecom and Network Systems
- Storage Drives
- Set-top-box
- USB3.1 Power Delivery
- Portable Devices
- Smart Phones, Feature Phones
- Hot-Swap Systems
