VN5010AK-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerBSOP (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 10mOhm |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VN5010 |
| Pin Count | 24 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 65A |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 46A |
| Nominal Input Voltage | 13V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Turn On Time | 35 µs |
| Output Peak Current Limit-Nom | 65A |
| Rds On (Typ) | 10m Ω (Max) |
| Turn Off Time | 65 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.47mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN5010AK-E Overview
As you can see, it's packaged in the way of a Tube.This file is included in package 24-PowerBSOP (0.295, 7.50mm Width).This lighting drivere has a mounting type of Surface Mount.The switch type of this switch is General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.The LED driver is equipped with 1 outputs.The LED driving board operates with a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.It has a total of Auto Restart features.It belongs to the VN5010 family.A total of 24 terminations have been found in it.In order to operate, the 24 pins are used.It contains 1 functions.Maximum output current falls to 65A when operation criteria are met.Supply voltages of 13V allow for high efficiency.It is positioned in the direction of Surface Mount.The LED driving board is equipped with a total of 24 pins.It has 10mOhm resistance.This electrical component is part of the VIPower? series.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.The maximum supply voltage is set to 36V.For normal operation, the supply voltage (Vsup) must be kept above 4.5V.This part's power supply is 8/36V.
VN5010AK-E Features
Supplied from 13V
Resistance of 10mOhm
VN5010AK-E Applications
There are a lot of STMicroelectronics VN5010AK-E Power Switches ICs applications.
- Portable Video Game Players
- Hot-Swap Systems
- Hard Disk Drives
- Wireless Headsets
- Wireless/Networking Cards
- USB3.1 Power Delivery
- Low Voltage I/O System Power
- Storage (HDDs, SSDs)
- HDD, SSD
- Various applications equipped with buttons
