VN5012AKTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerBSOP (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 12mOhm |
| Terminal Finish | MATTE TIN |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 2 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Base Part Number | VN5012 |
| Pin Count | 24 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 65A |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | On/Off |
| Nominal Supply Current | 1.5μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 45A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 12m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 2.22mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VN5012AKTR-E Overview
It is packaged in the manner of a Tape & Reel (TR).The 24-PowerBSOP (0.295, 7.50mm Width) package includes it.This lighting drivere has a mounting type of Surface Mount.There is a General Purpose switch type associated with it.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.It is possible to use 1 outputs in the lighting driver.To operate, it needs a supply voltage of Not Required.Voltage output is N-Channel volts at maximum.A lighting driver with Auto Restart features is available.It is a member of the VN5012 family.It contains 24 terminations.In order to operate, 24 pins are used.As far as functions are concerned, the lighting driver has 2.To meet the operation criteria, the maximum output current drops to 65A.It is possible to achieve a high level of efficiency with a supply voltage of 13V.As a result, it is mounted in the manner of Surface Mount.24 pins are connected to it in total.Currently, the LED driving board has 12mOhm resistance.This electrical component is included in the VIPower? series.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.The maximum supply voltage for this lighting driver is set to 36V (Vsup).A normal operation requires that the supply voltage (Vsup) remain above 4.5V.8/36V is the power supply of the part.
VN5012AKTR-E Features
Supplied from 13V
Resistance of 12mOhm
VN5012AKTR-E Applications
There are a lot of STMicroelectronics VN5012AKTR-E Power Switches ICs applications.
- Hot Swaps
- USB Power Distribution
- Wearable Devices
- Solid State Drivers
- PDAs
- Storage Drives
- Notebook PC
- Smart Phones, Feature Phones
- Hot Swap
- Notebook and Tablet Computers
