banner_page

VN5016AJ-E

8/36V N-Channel 0.8mm PMIC VIPower? Series VN5016 12 Pin 13V PowerSSO-12


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-VN5016AJ-E
  • Package: PowerSSO-12
  • Datasheet: PDF
  • Stock: 456
  • Description: 8/36V N-Channel 0.8mm PMIC VIPower? Series VN5016 12 Pin 13V PowerSSO-12 (Kg)

Details

Tags

Parameters
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 12
Termination SMD/SMT
ECCN Code EAR99
Terminal Finish NICKEL PALLADIUM GOLD
Subcategory Peripheral Drivers
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 13V
Terminal Pitch 0.8mm
Base Part Number VN5016
Pin Count 12
Number of Outputs 1
Output Type N-Channel
Max Output Current 40A
Operating Supply Voltage 13V
Supply Voltage-Max (Vsup) 36V
Power Supplies 8/36V
Interface On/Off
Current - Output (Max) 46A
Nominal Supply Current 3mA
Output Configuration High Side
Output Current 40A
Voltage - Supply (Vcc/Vdd) Not Required
Max Supply Current 3mA
Input Type Non-Inverting
Turn On Delay Time 35 μs
Switch Type General Purpose
Turn-Off Delay Time 50 μs
Ratio - Input:Output 1:1
Voltage - Load 4.5V~36V
Driver Number of Bits 1
Fault Protection Current Limiting (Fixed), Over Temperature, Over Voltage
Rds On (Typ) 16m Ω (Max)
Built-in Protections TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
Height 1.62mm
Length 5mm
Width 4mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 8 months ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case PowerSSO-12
Number of Pins 12
Operating Temperature -40°C~150°C TJ
Packaging Tube
Series VIPower™
JESD-609 Code e4
Feature Auto Restart
Part Status Active

VN5016AJ-E Overview


It is packaged in the form of a Tube.The PowerSSO-12 package contains it.The LED driver is mounted as Surface Mount.It owns the General Purpose switch type.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.The lighting driver is equipped with 1 outputs that can be used.Operation is based on Not Required supply voltage.There is a maximum output voltage of N-Channel volts on this LED driver.It is equipped with Auto Restart features.As you can see, it comes from the VN5016 family.A total of 12 terminations have been found in it.During operation, the 12 pins are used.It is important to note that the LED driving board has 1 functions.This lighting driver is capable of delivering a maximum output of 46A volts.Maximum output current falls to 40A when operation criteria are met.As long as the supply voltage is 13V, high efficiency can be achieved.Surface Mount is mounted in the way.The LED driving board is equipped with a total of 12 pins.These electrical components are part of the VIPower? series.When this case is used, the output current is set to 40A.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.This LED driver is configured to have a maximum supply voltage of 36V (Vsup).The power supply of the part is 8/36V.When using this LED driving board, it is recommended that the supply voltage is set to 13V.For its operation, a maximum current requirement of 3mA is required.

VN5016AJ-E Features


Supplied from 13V

VN5016AJ-E Applications


There are a lot of STMicroelectronics VN5016AJ-E Power Switches ICs applications.

  • PDAs
  • Smartphone and PDA
  • Storage Drives
  • Gaming
  • Various applications equipped with buttons
  • Solid State Drivers
  • USB3.1 Power Delivery
  • Notebook PC
  • Portable GPS
  • Set-top-box

Write a review

Note: HTML is not translated!
    Bad           Good