VN5016AJTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSSO-12 |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VN5016 |
| Pin Count | 12 |
| Output Type | N-Channel |
| Max Output Current | 40A |
| Operating Supply Voltage | 13V |
| Voltage | 36V |
| Interface | On/Off |
| Current - Output (Max) | 46A |
| Nominal Supply Current | 1.5mA |
| Current | 60A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 3mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 35 μs |
| Switch Type | General Purpose |
| Nominal Input Voltage | 13V |
| Turn-Off Delay Time | 50 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~36V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Number of Drivers | 1 |
| Rds On (Typ) | 16m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 1.65mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN5016AJTR-E Overview
The LED driver's packaged as a Tape & Reel (TR).There is a package for it in the PowerSSO-12 package.This lighting drivere has a mounting type of Surface Mount.It owns the General Purpose switch type.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts has been specified.In terms of features, the LED driving board has Auto Restart.As you can see, it comes from the VN5016 family.A total of 12 terminations have been recorded.For operation, we use the 12 pins.It is important to note that the LED driving board has 1 functions.The LED driver output is limited to 46AV.It is necessary to reduce the maximum output current to 40A to meet the operation criteria.With a supply voltage of 13V, high efficiency is possible.It is positioned in the direction of Surface Mount.12 pins are equipped with it.A component of this type is included in the VIPower? series.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.In order to achieve the best efficiency, the supply voltage should be set to 13V.It has a maximum current requirement of 3mA.It has 1 drivers in the part.
VN5016AJTR-E Features
Supplied from 13V
VN5016AJTR-E Applications
There are a lot of STMicroelectronics VN5016AJTR-E Power Switches ICs applications.
- USB Protection
- Notebook and Tablet Computers
- Storage Drives
- Wireless Modem Data Cards
- PC Cards
- Hard Disk Drives
- Hot Swap
- HDD and SSD
- Hot-Swap Systems
- Wireless/Networking Cards
