VN5025AJ-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSSO-12 |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Resistance | 25mOhm |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Base Part Number | VN5025 |
| Pin Count | 12 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 40A |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | On/Off |
| Current - Output (Max) | 28A |
| Nominal Supply Current | 3mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 μs |
| Switch Type | General Purpose |
| Nominal Input Voltage | 13V |
| Turn-Off Delay Time | 50 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 25m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height | 1.62mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN5025AJ-E Overview
Tube is how it's packaged.It is included in the package PowerSSO-12.In this case, the LED driving board is mounted as Surface Mount.The switch type of this switch is General Purpose.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.The LED driver is equipped with 1 outputs.The LED driving board operates at Not Required volts.Voltage output is N-Channel volts at maximum.It is equipped with Auto Restart features.There is a VN5025 family of things that it belongs to.As a result, there are 12 terminations.During operation, the 12 pins are used.It consists of 1 functions.In this case, the LED driving board can produce only 28AV as its maximum output.The maximum output current drops to 40A in order to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 13V.The LED driving board is mounted in the way of Surface Mount.12 pins are connected to it in total.In this LED driving board, there is 25mOhm resistance.It is included in the VIPower? series.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.The maximum supply voltage for this LED driver is 36V (Vsup).A normal operation requires that the supply voltage (Vsup) remain above 4.5V.In this part, the power supply is set to 8/36V.
VN5025AJ-E Features
Supplied from 13V
Resistance of 25mOhm
VN5025AJ-E Applications
There are a lot of STMicroelectronics VN5025AJ-E Power Switches ICs applications.
- Wireless/Networking Cards
- Portable/Handheld Devices
- PC Card Hot Swap
- HDD, SSD
- USB3.1 Power Delivery
- Portable GPS
- USB Power Distribution
- Various applications equipped with buttons
- Notebook PC
- Gaming
