VN5050AJ-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSSO-12 |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Resistance | 50mOhm |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Base Part Number | VN5050 |
| Pin Count | 12 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 18A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 3mA |
| Output Configuration | High Side |
| Output Current | 18A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 3mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 12A |
| Nominal Input Voltage | 13V |
| Turn-Off Delay Time | 40 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 50m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 1.62mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN5050AJ-E Overview
As you can see, it's packaged in the way of a Tube.It is included with the PowerSSO-12 package as well.Surface Mount is the mounting type of the LED driver.It owns the General Purpose switch type.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.There are 1 outputs available on this lighting driver.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It has a total of Auto Restart features.The VN5050 family contains this object.It has a total of 12 terminations.The 12 pins are used to operate the LED driver.There are 1 functions of the LED driver.This operation requires the maximum output current to be decreased to 18A.High efficiency is possible when the supply voltage is set to 13V.Surface Mount is mounted in the way of this LED driving board.The LED driving board is equipped with a total of 12 pins.The LED driver has 50mOhm resistance.This electrical component can be found in the VIPower? series.This case has the output current set to 18A.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.The maximum supply voltage for this LED driver is 36V (Vsup).This part has a power supply of 8/36V volts.The supply voltage should be set at 13V for best efficiency.The maximum current required for its operation is 3mA.
VN5050AJ-E Features
Supplied from 13V
Resistance of 50mOhm
VN5050AJ-E Applications
There are a lot of STMicroelectronics VN5050AJ-E Power Switches ICs applications.
- Portable Video Game Players
- Notebook and Tablet Computers
- USB Power Distribution
- USB Protection
- Hot-Swap Systems
- Notebook PC
- Wireless Modem Data Cards
- Storage (HDDs, SSDs)
- PDAs
- Wearable Devices
