VN5050AJTR-E
| Parameters | |
|---|---|
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSSO-12 |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Resistance | 50mOhm |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Base Part Number | VN5050 |
| Pin Count | 12 |
| Output Type | N-Channel |
| Max Output Current | 18A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 1.5mA |
| Output Configuration | High Side |
| Output Current | 16.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 3mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 12A |
| Turn-Off Delay Time | 40 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~36V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Number of Drivers | 1 |
| Rds On (Typ) | 50m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 4.9mm |
| Width | 3.9mm |
VN5050AJTR-E Overview
Tape & Reel (TR) is the way it's packaged.It is included with the PowerSSO-12 package as well.The lighting driver has the mounting type Surface Mount.A General Purpose switch type is owned by it.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.Operation is based on a supply voltage of Not Required.Voltage output is N-Channel volts at maximum.A lighting driver with Auto Restart features is available.There is a VN5050 family of things that it belongs to.The termination count is 12.During operation, the 12 pins are used.It has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 18A.High efficiency is possible at 13V supply voltage.Surface Mount is mounted in the way.It is equipped with a total of 12 pins.In this case, there is 50mOhm resistance in the LED driving board.This electrical component can be found in the VIPower? series.The output current is set to 16.5A in this case.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.A maximum supply voltage of 36V is set in Vsup.This part's power supply is 8/36V.It is recommended that the supply voltage be set at 13V in order to achieve maximum efficiency.3mA is the maximum current required to operate it.There are 1 drivers associated with this part.
VN5050AJTR-E Features
Supplied from 13V
Resistance of 50mOhm
VN5050AJTR-E Applications
There are a lot of STMicroelectronics VN5050AJTR-E Power Switches ICs applications.
- Solid-State Drives
- Telecom and Network Systems
- Notebook and Tablet Computers
- Various applications equipped with buttons
- Portable GPS Device
- Set-Top Boxes
- Portable/Handheld Devices
- Portable GPS
- USB Power Distribution
- Wireless Headsets
