VN5050J-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSSO-12 |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 50mOhm |
| Terminal Finish | MATTE TIN |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Base Part Number | VN5050 |
| Pin Count | 12 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 19A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Element Configuration | Single |
| Nominal Supply Current | 5μA |
| Output Configuration | High Side |
| Output Current | 18A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 3.5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 13.5A |
| Turn-Off Delay Time | 35 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 50m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 1.62mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN5050J-E Overview
As you can see, it's packaged in the way of a Tube.There is a PowerSSO-12 package that includes it.The mounting type of the LED driver is Surface Mount.This switch is of type General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.The lighting driver has a total of 1 outputs that are available for use.The LED driving board operates with a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts.There are Auto Restart features available on the LED driving board.This object belongs to the VN5050 family.It contains 12 terminations.It is necessary to use the 12 pins in order to operate the LED driver.It has 1 functions.Maximum output current falls to 19A when operation criteria are met.It is possible to obtain high efficiency with a supply voltage of 13V.The lighting driver is mounted in the direction of Surface Mount.There are 12 pins in total on this board.Currently, the LED driving board has a resistance of 50mOhm ohms.These electrical components are part of the VIPower? series.In this case, the output current will be set to 18A.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.In this LED driver, the maximum supply voltage is configured to be 36V (Vsup).This part has a power supply of 8/36V.Optimal efficiency requires a voltage of 13V.It requires a maximum current requirement of 3.5mA.
VN5050J-E Features
Supplied from 13V
Resistance of 50mOhm
VN5050J-E Applications
There are a lot of STMicroelectronics VN5050J-E Power Switches ICs applications.
- Portable GPS
- USB Protection
- Storage Drives
- Portable Music Players
- Wireless Headsets
- Hot Swap
- USB Ports/Hubs
- USB Power Distribution
- Wireless/Networking Cards
- Notebook and Tablet Computers
