VN5050JTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-PowerLSOP (0.154, 3.90mm Width) |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Base Part Number | VN5050 |
| Pin Count | 12 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 13.5A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 1.9mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 3.5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Nominal Input Voltage | 13V |
| Turn-Off Delay Time | 35 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 50m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN5050JTR-E Overview
Tape & Reel (TR) is how it's packaged.In the 12-PowerLSOP (0.154, 3.90mm Width) package, it is included.This LED driving board is mounted using the mounting type Surface Mount.It owns the General Purpose switch type.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.It is possible to use 1 outputs in the lighting driver.Operation is based on Not Required supply voltage.The maximum output voltage of this LED driver is N-Channel volts.Currently, the LED driving board is equipped with Auto Restart features.It belongs to the family VN5050.There are 12 terminations in it.The operation is performed through the 12 pins.The LED driving board has a total of 1 functions.This operation requires the maximum output current to be decreased to 13.5A.High efficiency is possible when the supply voltage is set to 13V.It is mounted in the way of Surface Mount.In total, it has 12 pins.A component of this type is included in the VIPower? series.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.A maximum supply voltage of 36V is set in Vsup.This part's power supply is 8/36V.The supply voltage should be set at 13V for best efficiency.It operates at a maximum current of 3.5mA.
VN5050JTR-E Features
Supplied from 13V
VN5050JTR-E Applications
There are a lot of STMicroelectronics VN5050JTR-E Power Switches ICs applications.
- Portable GPS
- Wearable Devices
- Gaming
- Portable/Handheld Devices
- Portable Video Game Players
- Set-Top Boxes
- Low Voltage I/O System Power
- Telecom and Network Systems
- Set-top-box
- Hot-Swap Systems
