VN5160S-E
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e4 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VN5160 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 5.4A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Interface | On/Off |
| Current - Output (Max) | 3.8A |
| Element Configuration | Single |
| Nominal Supply Current | 1.9mA |
| Output Configuration | High Side |
| Output Current | 5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 10 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 15 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~36V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Number of Drivers | 1 |
| Rds On (Typ) | 160m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 4.9mm |
| Width | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN5160S-E Overview
It is packaged in the form of a Tube.It is included in the package 8-SOIC (0.154, 3.90mm Width).It has been mounted as Surface Mount on the LED driver.It owns the General Purpose switch type.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.Operation is based on a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.The lighting driver has Auto Restart features.I believe it belongs to the VN5160 family.A total of 8 terminations can be found in it.In order to operate, the 8 pins are used.As far as the lighting driver is concerned, there are 1 functions.3.8AV is the maximum output of the LED driver.This results in the maximum output current dropping to 5.4A to meet the operation criteria.Using a voltage of 13V allows for high efficiency.The LED driving board is mounted in the way of Surface Mount.8 pins are connected to it in total.There is 160mOhm resistance on the LED driver.It is part of the VIPower? series.In this case, the output current will be set to 5A.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.The Vsup value (maximum supply voltage) is set to 36V.A supply voltage of 13V is recommended for maximum efficiency.It has 1 drivers in the part.
VN5160S-E Features
Supplied from 13V
Resistance of 160mOhm
VN5160S-E Applications
There are a lot of STMicroelectronics VN5160S-E Power Switches ICs applications.
- Hard Disk Drives
- Portable/Handheld Devices
- Various applications equipped with buttons
- Set-top-box
- Portable Video Game Players
- Notebook PC
- Portable GPS
- Wearable Devices
- Wireless Headsets
- Hot Swap
