VN5160STR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e4 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VN5160 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3.8A |
| Operating Supply Voltage | 36V |
| Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 2μA |
| Current | 5A |
| Output Configuration | High Side |
| Output Current | 5.4A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 13V |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 160m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 1.65mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN5160STR-E Overview
A Tape & Reel (TR) is used to package it.This file is included in package 8-SOIC (0.154, 3.90mm Width).Surface Mount is the mounting type of the LED driver.General Purpose is the switch type that it owns.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.The LED driver has 1 outputs.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.It is equipped with Auto Restart features.I believe it belongs to the VN5160 family.It consists of 8 terminations in total.The operation is carried out using the 8 pins.It is important to note that the LED driving board has 1 functions.The maximum output current drops to 3.8A in order to meet the operation criteria.With a supply voltage of 13V, high efficiency is possible.This lighting driver is mounted in the way of Surface Mount.8 pins are equipped with it.These electrical components are part of the VIPower? series.As a result, the output current is set to 5.4A.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.When using this LED driving board, it is recommended that the supply voltage is set to 36V.
VN5160STR-E Features
Supplied from 13V
VN5160STR-E Applications
There are a lot of STMicroelectronics VN5160STR-E Power Switches ICs applications.
- Set-top-box
- USB Power Distribution
- Storage (HDDs, SSDs)
- USB Power Distribution
- PDAs
- Portable/Handheld Devices
- Smartphone and PDA
- Smart Phones, Feature Phones
- Hot Swap
- USB3.1 Power Delivery
