VN540-12-E
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Pentawatt-5 (Straight Leads, Staggered Depth) |
| Number of Pins | 5 |
| Operating Temperature | -25°C~85°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 50mOhm |
| Terminal Finish | MATTE TIN |
| Subcategory | Peripheral Drivers |
| Terminal Position | SINGLE |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VN540 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Max Output Current | 4A |
| Supply Voltage-Max (Vsup) | 36V |
| Interface | On/Off |
| Nominal Supply Current | 1mA |
| Output Configuration | High Side |
| Output Current | 2.8A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 1mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 2.8A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 10V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 50m Ω (Max) |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 9.2mm |
| Length | 10.4mm |
| Width | 4.8mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN540-12-E Overview
The LED driver's packaged as a Tube.The Pentawatt-5 (Straight Leads, Staggered Depth) package contains it.Mounting type Through Hole is selected for the LED driving board.The switch type of this switch is General Purpose.To ensure reliable operation, set the temperature to -25°C~85°C TJ.By default, it is set to output 1.Operation is based on a supply voltage of Not Required.As far as features are concerned, the LED driving board has Status Flag.The VN540 family contains this object.A total of 5 terminations have been found in it.The operation is carried out using the 5 pins.There are 1 functions of the LED driver.The maximum output current is reduced to 4A to meet the operation criteria.Supply voltages of 24V allow for high efficiency.Through Hole is mounted in the way of this lighting driver.In this case, there is 50mOhm resistance in the LED driving board.There is an electrical component included in the VIPower? series.When this is the case, the output current is set to 2.8A.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.The lighting driver is configured to have a maximum supply voltage of 36V (Vsup).It has a maximum current requirement of 1mA.
VN540-12-E Features
Supplied from 24V
Resistance of 50mOhm
VN540-12-E Applications
There are a lot of STMicroelectronics VN540-12-E Power Switches ICs applications.
- Portable GPS Device
- PC Card Hot Swap
- Portable GPS
- Set-Top Boxes
- Hard Disk Drives
- Set-top-box
- Storage Drives
- HDD, SSD
- Notebook PC
- Gaming
