VN540SPTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -25°C~85°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 50mOhm |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Base Part Number | VN540 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Max Output Current | 4A |
| Voltage | 36V |
| Interface | On/Off |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 3mA |
| Current | 2.8A |
| Output Configuration | High Side |
| Output Current | 2.8A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 2.8A |
| Rise Time | 60ns |
| Fall Time (Typ) | 25 ns |
| Nominal Input Voltage | 36V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 10V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 50m Ω (Max) |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 3.55mm |
| Length | 7.6mm |
| Width | 9.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN540SPTR-E Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).The PowerSO-10 Exposed Bottom Pad package contains it.The mounting type of the LED driver is Surface Mount.General Purpose is the switch type that it owns.In order to guarantee reliable performance, the temperature should be set to -25°C~85°C TJ.As a default, the output is set to 1.Operation is based on Not Required supply voltage.There are Status Flag features available on the LED driving board.I believe it belongs to the VN540 family.There are 10 terminations in it.In order to operate, 10 pins are used.As far as functions are concerned, the lighting driver has 1.The maximum output current must drop to 4A to meet the operation criteria.As long as the supply voltage is 24V, high efficiency can be achieved.This lighting driver is mounted in the way of Surface Mount.A total of 10 pins are present on it.Currently, the LED driving board has a resistance of 50mOhm ohms.This electrical component can be found in the VIPower? series.As a result, the output current is set to 2.8A.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.
VN540SPTR-E Features
Supplied from 24V
Resistance of 50mOhm
VN540SPTR-E Applications
There are a lot of STMicroelectronics VN540SPTR-E Power Switches ICs applications.
- Portable/Handheld Devices
- Storage (HDDs, SSDs)
- Hot Swap
- USB Power Distribution
- Low Voltage I/O System Power
- USB3.1 Power Delivery
- PDAs
- Various applications equipped with buttons
- Portable GPS
- USB Power Distribution
