VN5772AK-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | NRND (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | OMNIFET III™, VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 50mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Applications | DC Motors, General Purpose, Relays |
| Technology | Power MOSFET |
| Voltage - Supply | 4.5V~36V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 1.27mm |
| Base Part Number | VN5772 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Max Output Current | 18A |
| Operating Supply Voltage | 35V |
| Interface | Logic |
| Output Configuration | Half Bridge (2) |
| Output Current | 18A |
| Max Supply Current | 6mA |
| Turn On Delay Time | 6 μs |
| Output Current per Channel | 12A |
| Nominal Input Voltage | 13V |
| Turn-Off Delay Time | 20 μs |
| Voltage - Load | 41V Max |
| Fault Protection | Current Limiting, ESD, Over Temperature, Over Voltage, Short Circuit, UVLO |
| Output Peak Current Limit-Nom | 24A |
| Rds On (Typ) | 50m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Load Type | Inductive, Capacitive, Resistive |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VN5772AK-E Overview
To package H bridge, use Tube.In order to save costs, H bridge is included in the 28-SOIC (0.295, 7.50mm Width) package.In addbridge driverion, 4.5V~36V can be used to improve reliabilbridge drivery.Surface Mount is mounted on H bridge circuit.A normal operation of -40°C~150°C TJ is enabled by motor driver H bridges operating temperature.H bridge motor driver can be used for a variety of purposes, including DC Motors, General Purpose, Relays.On PCBs, Surface Mount mounts H gate.Transmission lines are terminated with H bridges whose characteristic impedance matches their characteristic impedance, known as 28 terminations.An interface using 28 pins is used to provide pronged contact.Its base H bridge ic number, VN5772, can be used to locate other H bridge ics that are related.H bridge circuit operates on a voltage of 13V.This is a type of electronic H-bridge that belongs to the OMNIFET III?, VIPower? series.At a specified ambient temperature, 18A is the maximum load current that a power supply can provide.A current of 18A flows through the pins of the output and power supply.This bridge driver functions in part thanks to the 28 pins working together.It is equipped with 4 outputs.For the highest level of efficiency, the operating supply voltage is kept at 35V.
VN5772AK-E Features
Available in 28-SOIC (0.295, 7.50mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : VN5772
Number of Receivers: 35V
VN5772AK-E Applications
There are a lot of STMicroelectronics VN5772AK-E Full Bridge Drivers, Half-Bridge Drivers applications.
- Audio-visual equipment
- High-Performance Gaming Motherboards
- DC-DC Converters
- Networking Microprocessor Voltage Regulators
- Workstations
- Dual DC motor
- DVD players
- High current, low profile DC-DC converters
- Compact Blade Servers
- PC peripherals
