VN5772AKTR-E
| Parameters | |
|---|---|
| Load Type | Inductive, Capacitive, Resistive |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | NRND (Last Updated: 7 months ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET III™, VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 100MOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Applications | DC Motors, General Purpose, Relays |
| HTS Code | 8542.39.00.01 |
| Technology | Power MOSFET |
| Voltage - Supply | 4.5V~36V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 1.27mm |
| Base Part Number | VN5772 |
| Pin Count | 28 |
| Operating Supply Voltage | 13V |
| Interface | Logic |
| Nominal Supply Current | 3mA |
| Output Configuration | Half Bridge (2) |
| Output Current | 18A |
| Output Current per Channel | 18A |
| Nominal Input Voltage | 13V |
| Voltage - Load | 41V Max |
| Fault Protection | Current Limiting, ESD, Over Temperature, Over Voltage, Short Circuit, UVLO |
| Output Peak Current Limit-Nom | 24A |
| Rds On (Typ) | 50m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
VN5772AKTR-E Overview
It is packaged with Tape & Reel (TR).As a cost-saving measure, H bridge is included in the 28-SOIC (0.295, 7.50mm Width) package.In addbridge driverion, 4.5V~36V can be used to improve reliabilbridge drivery.In the way of Surface Mount, H bridge circuit is mounted.The operating temperature of -40°C~150°C TJ enables motor driver H bridge to work normally.H bridge motor driver is pretty useful in a wide range of applications, including DC Motors, General Purpose, Relays.Surface Mount is adopted as a technique to mount H gate on the PCB.28 terminations are used to terminate transmission lines with H bridges that match their characteristic impedance.28 pins is used as pronged contacts as H bridge ic of a signal interface.The base H bridge ic number of VN5772 allows you to find more related H bridge ics by using that number.For the operation of the H bridge, a voltage supply of 13V is used.A H-bridge in the OMNIFET III?, VIPower? series, this is a type of electronic H-bridge.Output and power supply pins have a current of 18A.The 28 pins of this bridge driver work together to allow it to perform its specific functions.For the highest level of efficiency, the operating supply voltage is kept at 13V.
VN5772AKTR-E Features
Available in 28-SOIC (0.295, 7.50mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : VN5772
Number of Receivers: 13V
VN5772AKTR-E Applications
There are a lot of STMicroelectronics VN5772AKTR-E Full Bridge Drivers, Half-Bridge Drivers applications.
- Notebook Computers
- High-Current DC-DC Point-of-Load Converters
- High-Performance Gaming Motherboards
- Telecom Microprocessor
- CD players
- PC peripherals
- Non-V-Core
- Voltage Regulators for GPUs
- DVD players
- Dual DC motor
