VN5E006ASPTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-PowerSOIC (0.370, 9.40mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 4.5mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN5E006 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 90A |
| Supply Voltage-Max (Vsup) | 28V |
| Power Supplies | 8/28V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | On/Off |
| Current - Output (Max) | 63.5A |
| Nominal Supply Current | 2mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 4mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 60A |
| Nominal Input Voltage | 13V |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 90A |
| Rds On (Typ) | 4.5m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 3.75mm |
| Length | 9.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN5E006ASPTR-E Overview
Tape & Reel (TR) is the way it's packaged.In the 10-PowerSOIC (0.370, 9.40mm Width) package, it is included.Surface Mount is the mounting type of the LED driver.General Purpose is the switch type that it owns.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.By default, it is set to output 1.To operate, it needs a supply voltage of Not Required.Voltage output is N-Channel volts at maximum.Auto Restart features are available on the lighting driver.As you can see, it comes from the VN5E006 family.In total, there are 10 terminations.10 pins are used for operation.Currently, the lighting driver has a total of 1 functions.This LED driver has a maximum output of 63.5AV.The maximum output current must drop to 90A to meet the operation criteria.With a supply voltage of 13V, high efficiency is possible.As a result, it is mounted in the manner of Surface Mount.It is equipped with a total of 10 pins.In this LED driving board, there is 4.5mOhm resistance.Electrical components such as this are included in the VIPower? series.It is self-contained in an econtainer with a capacity of Peripheral Drivers.In this LED driver, the maximum supply voltage is configured to be 28V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 4.5V.There is a voltage supply of 8/28V volts on this part.For its operation, a maximum current requirement of 4mA is required.
VN5E006ASPTR-E Features
Supplied from 13V
Resistance of 4.5mOhm
VN5E006ASPTR-E Applications
There are a lot of STMicroelectronics VN5E006ASPTR-E Power Switches ICs applications.
- Telecom and Network Systems
- Notebook PC
- Portable Music Players
- Set-Top Boxes
- Solid State Drivers
- Storage (HDDs, SSDs)
- Gaming
- Wearable Devices
- USB Protection
- Portable/Handheld Devices
