Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
NRND (Last Updated: 8 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-252-7, DPak (6 Leads + Tab) |
Number of Pins |
7 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Series |
VIPower™ |
JESD-609 Code |
e3 |
Feature |
Auto Restart |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
7 |
ECCN Code |
EAR99 |
Resistance |
16mOhm |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Peripheral Drivers |
Terminal Position |
SINGLE |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
13V |
Terminal Pitch |
0.85mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
VN5E016 |
Pin Count |
7 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Max Output Current |
73A |
Supply Voltage-Max (Vsup) |
28V |
Power Supplies |
8/28V |
Supply Voltage-Min (Vsup) |
4.5V |
Interface |
On/Off |
Nominal Supply Current |
1.5mA |
Output Configuration |
High Side |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Output Current per Channel |
54A |
Ratio - Input:Output |
1:1 |
Voltage - Load |
4.5V~28V |
Driver Number of Bits |
1 |
Fault Protection |
Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
Output Peak Current Limit-Nom |
73A |
Rds On (Typ) |
16m Ω (Max) |
High Side Driver |
YES |
Height Seated (Max) |
2.4mm |
Length |
6.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
VN5E016AH-E Overview
Tube is how it's packaged.It is included in the package TO-252-7, DPak (6 Leads + Tab).A Surface Mount mounting is used for the LED driving board.It owns the General Purpose switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.In this LED driver, there are no outputs available.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.Features of the lighting driver are Auto Restart.It belongs to the VN5E016 family.It has a total of 7 terminations.It is necessary to use the 7 pins in order to operate the LED driver.It consists of 1 functions.To comply with the operation criteria, the maximum output current is reduced to 73A.High efficiency is possible at 13V supply voltage.As a result, it is mounted in the manner of Surface Mount.This LED driver is equipped with a total of 7 pins.16mOhm resistance is present in the lighting driver.This electrical component is included in the VIPower? series.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.The LED driver is configured with a maximum supply voltage of 28V (Vsup).For normal operation, the supply voltage (Vsup) must be kept above 4.5V.It has a power supply of 8/28V.
VN5E016AH-E Features
Supplied from 13V
Resistance of 16mOhm
VN5E016AH-E Applications
There are a lot of STMicroelectronics VN5E016AH-E Power Switches ICs applications.
- Solid State Drivers
- USB3.1 Power Delivery
- Hot Swap
- Hot Swap
- Solid-State Drives
- Handheld Devices
- Storage (HDDs, SSDs)
- USB Protection
- PC Cards
- Set-Top Boxes