banner_page

VN5E016AHTR-E

N-Channel 0.85mm PMIC VIPower? Series VN5E016 6 Pin 13V TO-252-7, DPak (6 Leads + Tab)


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-VN5E016AHTR-E
  • Package: TO-252-7, DPak (6 Leads + Tab)
  • Datasheet: PDF
  • Stock: 700
  • Description: N-Channel 0.85mm PMIC VIPower? Series VN5E016 6 Pin 13V TO-252-7, DPak (6 Leads + Tab) (Kg)

Details

Tags

Parameters
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Output Current per Channel 54A
Ratio - Input:Output 1:1
Voltage - Load 4.5V~28V
Driver Number of Bits 1
Fault Protection Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage
Output Peak Current Limit-Nom 73A
Rds On (Typ) 16m Ω (Max)
High Side Driver YES
Height Seated (Max) 2.4mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status NRND (Last Updated: 7 months ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case TO-252-7, DPak (6 Leads + Tab)
Number of Pins 6
Operating Temperature -40°C~150°C TJ
Packaging Tape & Reel (TR)
Series VIPower™
JESD-609 Code e3
Feature Auto Restart
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 7
ECCN Code EAR99
Resistance 16mOhm
Terminal Finish Matte Tin (Sn)
Subcategory Peripheral Drivers
Terminal Position SINGLE
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 13V
Terminal Pitch 0.85mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number VN5E016
Pin Count 7
JESD-30 Code R-PSSO-G7
Number of Outputs 1
Output Type N-Channel
Max Output Current 73A
Operating Supply Voltage 28V
Interface On/Off
Nominal Supply Current 1.5mA
Output Configuration High Side
Output Current 73A

VN5E016AHTR-E Overview


Tape & Reel (TR) is how it's packaged.It is included with the TO-252-7, DPak (6 Leads + Tab) package as well.It has been mounted as Surface Mount on the LED driver.General Purpose is the switch type that it owns.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.The lighting driver has a total of 1 outputs that are available for use.A supply voltage of Not Required is required for it to operate.Voltage output is N-Channel volts at maximum.As far as features are concerned, the LED driving board has Auto Restart.There is a VN5E016 family of things that it belongs to.A total of 7 terminations have been found in it.For operation, we use the 6 pins.There are 1 functions of the LED driver.As a result, the maximum output current is reduced to 73A in order to meet the operation requirements.The supply voltage can be 13V for high efficiency.Surface Mount is mounted in the way of this LED driving board.The LED driver has a total of 7 pins.Lighting drivers with 16mOhm resistance are used.It belongs to the VIPower? series.This results in a 73A output current.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.When using this LED driving board, it is recommended that the supply voltage is set to 28V.

VN5E016AHTR-E Features


Supplied from 13V
Resistance of 16mOhm

VN5E016AHTR-E Applications


There are a lot of STMicroelectronics VN5E016AHTR-E Power Switches ICs applications.

  • Notebook PC
  • USB3.1 Power Delivery
  • Hot Swaps
  • Wireless Headsets
  • Smartphone and PDA
  • Smart Phones, Feature Phones
  • Notebook and Tablet Computers
  • Storage Drives
  • Various applications equipped with buttons
  • HDD, SSD

Write a review

Note: HTML is not translated!
    Bad           Good