VN5E025AJ-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSSO-12 |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Resistance | 25mOhm |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VN5E025 |
| Pin Count | 12 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 60A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 28V |
| Power Supplies | 8/28V |
| Interface | On/Off |
| Nominal Supply Current | 3mA |
| Output Configuration | High Side |
| Output Current | 60A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 3mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 15 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 43A |
| Turn-Off Delay Time | 40 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 25m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN5E025AJ-E Overview
It is packaged in the manner of a Tube.This file is included in package PowerSSO-12.The lighting driver has the mounting type Surface Mount.The switch type is General Purpose.To ensure reliable operation, set the temperature to -40°C~150°C TJ.The LED driver has 1 outputs.To operate, it needs a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.It is equipped with Auto Restart features.This object belongs to the VN5E025 family.The termination count is 12.For operation, we use the 12 pins.It consists of 1 functions.The maximum output current must drop to 60A to meet the operation criteria.The supply voltage of 13V is conducive to high efficiency.As a result, it is mounted in the manner of Surface Mount.It is equipped with a total of 12 pins.In this case, there is 25mOhm resistance in the LED driving board.Electrical components such as this are included in the VIPower? series.As a result, the output current is set to 60A.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.The Vsup value (maximum supply voltage) is set to 28V.This part is powered by 8/28V.The supply voltage should be set at 13V for best efficiency.3mA is the maximum current required to operate it.
VN5E025AJ-E Features
Supplied from 13V
Resistance of 25mOhm
VN5E025AJ-E Applications
There are a lot of STMicroelectronics VN5E025AJ-E Power Switches ICs applications.
- Portable Video Game Players
- Storage Drives
- Storage (HDDs, SSDs)
- Hot-Swap Systems
- Mobile Communication Devices
- Handheld Devices
- USB3.1 Power Delivery
- Set-Top Boxes
- Hot Swap
- Smartphone and PDA
