VN5E050AJ-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSSO-12 |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Resistance | 50mOhm |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Base Part Number | VN5E050 |
| Pin Count | 12 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 27A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 28V |
| Power Supplies | 8/28V |
| Interface | On/Off |
| Nominal Supply Current | 3mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 3mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 19A |
| Turn-Off Delay Time | 40 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 50m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN5E050AJ-E Overview
Tube is the way it's packaged.This package is included in PowerSSO-12.This LED driving board is mounted using the mounting type Surface Mount.A General Purpose switch type is owned by it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.The lighting driver is equipped with 1 outputs that can be used.The LED driving board operates at Not Required volts.It has a maximum output voltage of N-Channel volts.The lighting driver has Auto Restart features.It is part of the VN5E050 family of LED drivers.A total of 12 terminations have been found in it.In order to operate, 12 pins are used.The LED driving board has a total of 1 functions.The maximum output current drops to 27A in order to meet the operation criteria.High efficiency is possible when the supply voltage is set to 13V.The LED driving board is mounted in the way of Surface Mount.The LED driver has a total of 12 pins.It has a resistance of 50mOhm.There is an electrical component included in the VIPower? series.It is self-contained in an econtainer with a capacity of Peripheral Drivers.The maximum supply voltage for this LED driver is 28V (Vsup).In this case, the power supply is 8/28V.When using this LED driving board, it is recommended that the supply voltage is set to 13V.The maximum current required for its operation is 3mA.
VN5E050AJ-E Features
Supplied from 13V
Resistance of 50mOhm
VN5E050AJ-E Applications
There are a lot of STMicroelectronics VN5E050AJ-E Power Switches ICs applications.
- Smartphone and PDA
- Hot-Swap Systems
- Wireless Headsets
- Portable Video Game Players
- Notebook PC
- Notebook and Tablet Computers
- Wireless Modem Data Cards
- Portable GPS
- Portable Devices
- USB3.1 Power Delivery
