VN5E050J-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSSO-12 |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Resistance | 50mOhm |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Base Part Number | VN5E050 |
| Pin Count | 12 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 27A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 28V |
| Power Supplies | 8/28V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 19A |
| Turn-Off Delay Time | 40 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 50m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN5E050J-E Overview
It is packaged in the form of a Tube.This file is included in package PowerSSO-12.The mounting type of the LED driver is Surface Mount.General Purpose is the switch type it owns.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.The LED driver has a total of 1 outputs.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage is N-Channel volts.In terms of features, the LED driving board has Auto Restart.It is a member of the VN5E050 family.A total of 12 terminations have been found in it.The operation is performed through the 12 pins.The LED driving board has a total of 1 functions.In order to meet the operation criteria, the maximum output current drops to 27A.With a supply voltage of 13V, high efficiency is possible.Surface Mount is mounted in the way of this LED driving board.There are 12 pins in total on this board.Lighting drivers with 50mOhm resistance are used.These electrical components are part of the VIPower? series.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.The lighting driver is configured to have a maximum supply voltage of 28V (Vsup).A 8/28V power supply is used by the part.The supply voltage should be set at 13V for best efficiency.It operates at a maximum current of 6mA.
VN5E050J-E Features
Supplied from 13V
Resistance of 50mOhm
VN5E050J-E Applications
There are a lot of STMicroelectronics VN5E050J-E Power Switches ICs applications.
- Low Voltage I/O System Power
- Wireless Modem Data Cards
- Hot Swap
- Notebook and Tablet Computers
- PC Card Hot Swap
- Handheld Devices
- Telecom and Network Systems
- USB Protection
- USB Power Distribution
- USB Ports/Hubs
