VN5E050JTR-E
| Parameters | |
|---|---|
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Base Part Number | VN5E050 |
| Pin Count | 12 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 19A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 28V |
| Power Supplies | 8/28V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 40 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 50m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSSO-12 |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
VN5E050JTR-E Overview
As a result, it is packaged in the form of a Tape & Reel (TR).Package PowerSSO-12 contains it.This lighting drivere has a mounting type of Surface Mount.There is a switch type of General Purpose.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.In this LED driver, there are no outputs available.The LED driving board operates with a supply voltage of Not Required.Voltage output is N-Channel volts at maximum.There are Auto Restart features available on the LED driving board.It belongs to the VN5E050 family.It has a total of 12 terminations.In order to operate, 12 pins are used.It contains 1 functions.The maximum output current must drop to 19A to meet the operation criteria.A supply voltage of 13V leads to high efficiency.This lighting driver is mounted in the way of Surface Mount.There are 12 pins in total on this board.This electrical component is part of the VIPower? series.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.A maximum supply voltage of 28V is set in Vsup.In this case, the power supply is 8/28V.It is recommended to set the supply voltage to 13V for optimum efficiency.6mA is the maximum current required to operate it.
VN5E050JTR-E Features
Supplied from 13V
VN5E050JTR-E Applications
There are a lot of STMicroelectronics VN5E050JTR-E Power Switches ICs applications.
- Various applications equipped with buttons
- Hot Swaps
- Wireless Headsets
- PC Cards
- USB Power Distribution
- Set-Top Boxes
- Notebook and Tablet Computers
- HDD and SSD
- Portable GPS Device
- USB Protection
