VN5E050MJ-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSSO-12 |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Resistance | 50mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VN5E050 |
| Pin Count | 12 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 27A |
| Supply Voltage-Max (Vsup) | 28V |
| Power Supplies | 8/28V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | On/Off |
| Nominal Supply Current | 1.5mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 19A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Turn On Time | 20 µs |
| Output Peak Current Limit-Nom | 27A |
| Rds On (Typ) | 50m Ω (Max) |
| Turn Off Time | 40 µs |
| Built-in Protections | TRANSIENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Length | 5mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN5E050MJ-E Overview
A Tube is used to package it.In the PowerSSO-12 package, it is included.The LED driver is mounted as Surface Mount.The switch type is General Purpose.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.It is possible to use 1 outputs in the lighting driver.Operation is based on a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.In terms of features, the LED driving board has Auto Restart.The VN5E050 family consists of this type.The termination count is 12.The 12 pins are used to operate the LED driver.Currently, the lighting driver has a total of 1 functions.To comply with the operation criteria, the maximum output current is reduced to 27A.Using a voltage of 13V allows for high efficiency.Surface Mount is mounted in the way of this LED driving board.A total of 12 pins are present on it.The LED driver has 50mOhm resistance.Electrical components such as this are included in the VIPower? series.It is self-contained in an econtainer with a capacity of Peripheral Drivers.The lighting driver is configured to have a maximum supply voltage of 28V (Vsup).The supply voltage (Vsup) should be kept above 4.5V for normal operation.This part has a power supply of 8/28V.
VN5E050MJ-E Features
Supplied from 13V
Resistance of 50mOhm
VN5E050MJ-E Applications
There are a lot of STMicroelectronics VN5E050MJ-E Power Switches ICs applications.
- Smart Phones, Feature Phones
- Hot-Swap Systems
- Portable Music Players
- Handheld Devices
- Hot Swap
- Portable GPS
- USB Protection
- Solid State Drivers
- USB Power Distribution
- Wireless Headsets
