VN5E050MJTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSSO-12 |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Resistance | 50mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VN5E050 |
| Pin Count | 12 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 27A |
| Supply Voltage-Max (Vsup) | 28V |
| Power Supplies | 8/28V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | On/Off |
| Operating Supply Current | 1.5mA |
| Nominal Supply Current | 1.5mA |
| Output Configuration | High Side |
| Output Current | 27A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 19A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Turn On Time | 20 µs |
| Output Peak Current Limit-Nom | 27A |
| Rds On (Typ) | 50m Ω (Max) |
| Turn Off Time | 40 µs |
| Built-in Protections | TRANSIENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 5mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN5E050MJTR-E Overview
It is package in Tape & Reel (TR) case.This file is included in package PowerSSO-12.Surface Mount is the mounting type of the LED driver.There is a switch type of General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.As a default, the output is set to 1.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.Currently, the LED driving board is equipped with Auto Restart features.It is a member of the VN5E050 family.There are 12 terminations in it.The 12 pins are used for the operation of the system.Currently, the lighting driver has a total of 1 functions.This results in the maximum output current dropping to 27A to meet the operation criteria.With a supply voltage of 13V, high efficiency is possible.As a result, it is mounted in the manner of Surface Mount.The LED driver has a total of 12 pins.There is 50mOhm resistance on the LED driver.These electrical components are part of the VIPower? series.It is set to 27A in this case.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.This LED driver is configured to have a maximum supply voltage of 28V (Vsup).Normal operation requires a voltage above 4.5V for the supply voltage.This part has a power supply of 8/28V volts.
VN5E050MJTR-E Features
Supplied from 13V
Resistance of 50mOhm
VN5E050MJTR-E Applications
There are a lot of STMicroelectronics VN5E050MJTR-E Power Switches ICs applications.
- Mobile Communication Devices
- Notebook PC
- Low Voltage I/O System Power
- Storage Drives
- Notebook and Tablet Computers
- Handheld Devices
- Hot Swaps
- PDAs
- Wireless Modem Data Cards
- HDD and SSD
