VN5E160AS-E
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN5E160 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 10A |
| Operating Supply Voltage | 13V |
| Interface | On/Off |
| Nominal Supply Current | 1.9mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 10 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 7A |
| Nominal Input Voltage | 13V |
| Turn-Off Delay Time | 10 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Rds On (Typ) | 160m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN5E160AS-E Overview
The LED driver's packaged as a Tube.This file is included in package 8-SOIC (0.154, 3.90mm Width).Surface Mount is the mounting type of the LED driver.There is a switch type of General Purpose.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.The LED driver has 1 outputs.A supply voltage of Not Required is required for it to operate.There is a maximum output voltage of N-Channel volts on this LED driver.As far as features are concerned, the LED driving board has Auto Restart.I believe it belongs to the VN5E160 family.It contains 8 terminations.For operation, 8 pins are used.Currently, there are 1 functions associated with the lighting driver.To comply with the operation criteria, the maximum output current is reduced to 10A.Using a voltage of 13V allows for high efficiency.This lighting driver is mounted in the way of Surface Mount.In total, it has 8 pins.It has a resistance of 160mOhm.This electrical component is included in the VIPower? series.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.When using this LED driving board, it is recommended that the supply voltage is set to 13V.
VN5E160AS-E Features
Supplied from 13V
Resistance of 160mOhm
VN5E160AS-E Applications
There are a lot of STMicroelectronics VN5E160AS-E Power Switches ICs applications.
- HDD and SSD
- PC Card Hot Swap
- Storage (HDDs, SSDs)
- Handheld Devices
- Portable/Handheld Devices
- USB Protection
- Wireless/Networking Cards
- USB Power Distribution
- Set-Top Boxes
- Solid-State Drives
