VN5E160MS-E
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN5E160 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 10A |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | On/Off |
| Nominal Supply Current | 1.9mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 7A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 160m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 5mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN5E160MS-E Overview
As a result, it is packaged in the form of a Tube.It is included with the 8-SOIC (0.154, 3.90mm Width) package as well.The lighting driver is mounted in the Surface Mount position.There is a General Purpose switch type associated with it.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.The lighting driver is equipped with 1 outputs that can be used.A voltage of Not Required is used to power it.A maximum output voltage of N-Channel volts can be obtained with this LED driver.There are Auto Restart features available on the LED driving board.It belongs to the VN5E160 family.It contains 8 terminations.In order to operate, 8 pins are used.It is important to note that the LED driving board has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 10A.The supply voltage can be 13V for high efficiency.The lighting driver is mounted in the direction of Surface Mount.As a result, it has a total of 8 pins.It has a resistance of 160mOhm.A component of this type is included in the VIPower? series.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 4.5V.
VN5E160MS-E Features
Supplied from 13V
Resistance of 160mOhm
VN5E160MS-E Applications
There are a lot of STMicroelectronics VN5E160MS-E Power Switches ICs applications.
- Solid State Drivers
- Low Voltage I/O System Power
- Portable/Handheld Devices
- Notebook and Tablet Computers
- USB Ports/Hubs
- Wireless Modem Data Cards
- Telecom and Network Systems
- PDAs
- Wireless/Networking Cards
- Hot Swap
