VN5E160MSTR-E
| Parameters | |
|---|---|
| Switch Type | General Purpose |
| Output Current per Channel | 7A |
| Nominal Input Voltage | 13V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 160m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 5mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN5E160 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 10A |
| Operating Supply Voltage | 28V |
| Interface | On/Off |
| Nominal Supply Current | 1.9mA |
| Output Configuration | High Side |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
VN5E160MSTR-E Overview
It is packaged in the manner of a Tape & Reel (TR).It is included with the 8-SOIC (0.154, 3.90mm Width) package as well.It has been mounted as Surface Mount on the LED driver.A General Purpose switch type is owned by it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.There are 1 outputs available on this lighting driver.The LED driving board operates with a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.It has a total of Auto Restart features.It belongs to the VN5E160 family.It has a total of 8 terminations.For operation, 8 pins are used.Currently, the lighting driver has a total of 1 functions.To comply with the operation criteria, the maximum output current is reduced to 10A.High efficiency is possible when the supply voltage is set to 13V.The LED driving board is mounted in the way of Surface Mount.The LED driver has a total of 8 pins.The LED driver has 160mOhm resistance.It belongs to the VIPower? series.This case has the output current set to 10A.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.It is recommended that the supply voltage be set at 28V in order to achieve maximum efficiency.
VN5E160MSTR-E Features
Supplied from 13V
Resistance of 160mOhm
VN5E160MSTR-E Applications
There are a lot of STMicroelectronics VN5E160MSTR-E Power Switches ICs applications.
- Hard Disk Drives
- USB3.1 Power Delivery
- HDD, SSD
- Portable GPS
- Various applications equipped with buttons
- Hot-Swap Systems
- USB Protection
- Portable GPS Device
- Gaming
- Notebook and Tablet Computers
